Adash 3600-MPX Manual de usuario descargar pdf (Pagina 11)

ADASH Ltd. Adash 3600-MPX

ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz

For next technical and contact information visit www.adash.net, www.adash.cz

The channels for vibration measurement are numbered 1 - 8 at the Adash 3600-MPX module.

The signals of channel 1 are led to the upper left terminal connectors, other channels gradually

continue on the right up to the channel number 6.

The signals of channels 7 and 8 are led to the lower right terminal connectors (channel 7 is at the

end).

Each channel occupies 3 terminal connectors at the terminal board, which are, for all the channels, in

the following order, starting from the left: +ICP, -ICP, SHLD.

Fig. Connection of channels 7 and 8

7. Replace the terminal connector covers.

The extension of the Adash 3600 set with the 3600-MPX module is completed and the system is ready

for measurement.

Channel 7

NOTICE.

Each module of Adash 3600 system has individual unique internal address on RS-485 - see

User's guide Vibration Monitoring System Adash 3600 (3600main-com-pwr_man_en.pdf - List o

Module Numbers on Interface RS-485 chapter). Each supplied system is pre-configured b

producer.

- If you work with several systems, do not change individual modules between systems without

check of each address (via Adash 3600 Setup software).

- Regarding repairs and upgrades contact your supplier for correct order information. Then you

will receive each module configured correctly.

If you do not respect this rules, then communication conflicts appears and

the system will not work.

1 2 ... 6 7 8 9 10 11 12

Sin comentarios

Adash 3600-MPX Manual de usuario Pagina 11